E0818 02:34:42 gemini_impl: main: 57] Gemini CLI is in Dogfood. Always review commands and output before using them. See http://go/gemini-cli-dogfood for details. E0818 02:34:44 gemini_impl: main: 219] MCP developer mode enabled. Note: third-party MCP servers are not permitted for use in google3 development, see b/428217139. ███ █████████ ░░░███ ███░░░░░███ ░░░███ ███ ░░░ ░░░███░███ ███░ ░███ █████ ███░ ░░███ ░░███ ███░ ░░█████████ ░░░ ░░░░░░░░░ Tips for getting started: 1. Ask questions, edit files, or run commands. 2. Be specific for the best results. 3. /help for more information. ╭──────────────────────────────────────────────────────────────────────────╮ │ > A WIP patch to spanify the following files has been applied: │ │ - media/formats/mp4/avc_unittest.cc │ │ │ │ --- │ │ │ │ Your job is to finish/polish the patch following the instructions │ │ below. │ │ Your job is done when the patch is ready. Do not start trying to │ │ spanify files beyond the scope of this patch. │ │ You should first examine the patch with `git show HEAD`. │ │ When the job is done, say "GEMINI_JOB_COMPLETE_GEMINI". │ │ │ │ ### **LLM Prompt: Fixing Unsafe Buffer Usage in Chromium** │ │ │ │ **Role:** You are an expert C++ developer specializing in memory │ │ safety for the Chromium project. Your primary goal is to eliminate │ │ unsafe buffer operations by migrating legacy C-style code to modern, │ │ safer C++ constructs, with a strong emphasis on `base::span` and │ │ other standard library containers. You must adhere to Chromium's │ │ coding standards and the specific guidelines for this task. │ │ │ │ **Task:** Your task is to fix unsafe buffer usage in a given C++ │ │ file. You should compile the target with provided command line after │ │ removing the `#pragma allow_unsafe_buffers` and `UNSAFE_TODO` │ │ directive. You will use these errors to identify and fix the unsafe │ │ code, applying the principles and patterns outlined below. **Your │ │ changes must be minimal and targeted, directly addressing only the │ │ unsafe buffer errors.** While the primary focus is on the given │ │ file, you are expected to modify other files (e.g., header files or │ │ call sites) if necessary to ensure the code compiles and tests pass. │ │ │ │ ### **Guiding Philosophy** │ │ * **Safety Through the Type System:** The fundamental goal is to │ │ encode buffer size information into the C++ type system. A `char*` │ │ has no size information, making it unsafe. A `base::span` has │ │ a size, making it safe. Every change you make should serve this │ │ principle. │ │ * **Minimalism is Essential:** Your task is not to refactor or │ │ improve the code in general. You are a specialist surgeon fixing one │ │ specific problem: unsafe buffer usage. Make the smallest possible │ │ change that fixes the compiler warning and passes tests. │ │ * **Trust, But Verify with Compilation:** Your primary feedback │ │ loop is the compiler. After removing the `allow_unsafe_buffers` │ │ pragma, the `-Wunsafe-buffer-usage` errors are your map. Use them to │ │ identify every location that needs a fix. │ │ │ │ │ │ You must refer to these documents to ensure your solutions are │ │ idiomatic and correct within the Chromium ecosystem. │ │ │ │ # Workflow Tips │ │ │ │ ## General Workflow: │ │ │ │ * **User Guidance:** Proactively communicate your plan and the │ │ reason for each │ │ step. │ │ * **File Creation Pre-check:** Before creating any new file, you │ │ MUST first │ │ perform a thorough search for existing files that can be │ │ modified or │ │ extended. This is especially critical for tests; never create a │ │ new test │ │ file if one already exists for the component in question. Always │ │ add new │ │ tests to the existing test file. │ │ * **Read Before Write/Edit:** **ALWAYS** read the entire file │ │ content │ │ immediately before writing or editing. │ │ │ │ ## MANDATORY DEBUGGING PROTOCOL (WHEN STUCK) │ │ │ │ * **Trigger:** You **MUST** activate this protocol if you │ │ encounter a │ │ **Repeated Tool or Command Failure**. │ │ │ │ * **Definition of Repeated Failure:** A tool or command (e.g., │ │ `autoninja`, `autotest.py`, `git cl format`, `replace`) │ │ fails. You apply │ │ a fix or change your approach. You run the *exact same tool │ │ or command* │ │ again, and it fails for a **second time**. │ │ * **Sensitivity:** This protocol is intentionally highly │ │ sensitive. The │ │ error message for the second failure does **NOT** need to be │ │ the same as │ │ the first. Any subsequent failure of the same tool or │ │ command after a │ │ fix attempt is a trigger. This is to prevent "whack-a-mole" │ │ scenarios │ │ where fixing one error simply reveals another, indicating a │ │ deeper │ │ underlying problem. │ │ │ │ *Check your history to confirm the repeated failure of the tool │ │ or command.* │ │ │ │ * **Action:** If the trigger condition is met: │ │ │ │ 1. **STOP:** **DO NOT** immediately retry the *same* fix or │ │ re-run the │ │ *same* tool or command again. │ │ 2. **INFORM USER:** Immediately inform the user that you are │ │ invoking the │ │ debugging protocol because a tool or command has failed │ │ twice in a row. │ │ 3. **REASON:** **Explicitly state** which tool or command │ │ failed repeatedly │ │ (e.g., "`autotest` failed, I applied a fix, and it failed │ │ again. I am │ │ now invoking the debugging protocol to analyze the root │ │ cause."). │ │ Mentioning the specific error messages is good, but the │ │ repeated failure │ │ is the primary trigger. │ │ 4. **DEBUG:** Look closely into your own context, memory, and │ │ traces. Give │ │ a deep analysis of why you are repeating mistakes and stuck │ │ in a failure │ │ loop. The analysis should focus on the *root cause* of the │ │ repeated │ │ failures, not just the most recent error message. Utilize │ │ any tools that │ │ help with the debugging investigation. │ │ 5. **PROCEED:** Use the suggestions returned by the DEBUG step │ │ to inform │ │ your next attempt at a fix. Explain the new, more │ │ comprehensive plan to │ │ the user. If the DEBUG step provides tool calls, execute │ │ them. │ │ Otherwise, formulate a new plan based on its suggestions. │ │ │ │ Do not use the `read_many_files` tool. Read files one at a time with │ │ `read_file`. │ │ │ │ Any time you want to use `grep -r`, use `rg` instead. │ │ │ │ Any time you want to use `find`, use `fdfind` instead. │ │ │ │ ## Standard Edit/Fix Workflow: │ │ │ │ **IMPORTANT:** This workflow takes precedence over all other coding │ │ instructions. Read and follow everything strictly without skipping │ │ steps │ │ whenever code editing is involved. Any skipping requires a proactive │ │ message to │ │ the user about the reason to skip. │ │ │ │ 1. **Comprehensive Code and Task Understanding (MANDATORY FIRST │ │ STEP):** Before │ │ writing or modifying any code, you MUST perform the following │ │ analysis to │ │ ensure comprehensive understanding of the relevant code and the │ │ task. This │ │ is a non-negotiable prerequisite for all coding tasks. │ │ * **a. Identify the Core Files:** Locate the files that are │ │ most relevant │ │ to the user's request. All analysis starts from these files. │ │ * **b. Conduct a Full Audit:** │ │ i. Read the full source of **EVERY** core file. │ │ ii. For each core file, summarize the control flow and │ │ ownership │ │ semantics. State the intended purpose of the core file. │ │ * **c. State Your Understanding:** After completing the audit, │ │ you should │ │ briefly state the core files you have reviewed, confirming │ │ your │ │ understanding of the data flow and component interactions │ │ before │ │ proposing a plan. │ │ * **d. Anti-Patterns to AVOID:** │ │ * **NEVER** assume the behavior of a function or class │ │ from its name │ │ or from usage in other files. **ALWAYS** read the source │ │ implementation. │ │ * **ALWAYS** check at least one call-site for a function │ │ or class to │ │ understand its usage. The context is as important as the │ │ implementation. │ │ 2. **Make Change:** After a comprehensive code and task │ │ understanding, apply │ │ the edit or write the file. │ │ * When making code edits, focus **ONLY** on code edits that │ │ directly solve │ │ the task prompted by the user. │ │ 3. **Write/Update Tests:** │ │ * First, search for existing tests related to the modified │ │ code and update │ │ them as needed to reflect the changes. │ │ * If no relevant tests exist, write new unit tests or │ │ integration tests if │ │ it's reasonable and beneficial for the change made. │ │ * If tests are deemed not applicable for a specific change │ │ (e.g., a │ │ trivial comment update), explicitly state this and the │ │ reason why before │ │ moving to the next step. │ │ 4. **Build:** **ALWAYS** build relevant targets after making edits. │ │ 5. **Fix compile errors:** **ALWAYS** follow these steps to fix │ │ compile errors. │ │ * **ALWAYS** take the time to fully understand the problem │ │ before making │ │ any fixes. │ │ * **ALWAYS** read at least one new file for each compile │ │ error. │ │ * **ALWAYS** find, read, and understand **ALL** files related │ │ to each │ │ compile error. For example, if an error is related to a │ │ missing member │ │ of a class, find the file that defines the interface for the │ │ class, read │ │ the whole file, and then create a high-level summary of the │ │ file that │ │ outlines all core concepts. Come up with a plan to fix the │ │ error. │ │ * **ALWAYS** check the conversation history to see if this │ │ same │ │ error occurred earlier, and analyze previous solutions to │ │ see why they │ │ didn't work. │ │ * **NEVER** make speculative fixes. You should be confident │ │ before │ │ applying any fix that it will work. If you are not │ │ confident, read more │ │ files. │ │ 6. **Test:** **ALWAYS** run relevant tests after a successful │ │ build. If you │ │ cannot find any relevant test files, you may prompt the user to │ │ ask how this │ │ change should be tested. │ │ 7. **Fix test errors**: │ │ * **ALWAYS** take the time to fully understand the problem │ │ before making │ │ any fixes. │ │ 8. **Iterate:** Repeat building and testing using the above steps │ │ until all are │ │ successful. │ │ │ │ --- │ │ │ │ ### **Core Principles for Safe Buffer Handling** │ │ │ │ Before looking at specific patterns, adhere to these fundamental │ │ principles. │ │ │ │ * **Principle 0: Clearly Distinguish Ownership** │ │ Before you change any code, your first step is to determine if │ │ the variable in question represents owning or non-owning memory. │ │ This single decision dictates the correct C++ type to use. │ │ │ │ * **Owning Buffers:** Use an owning container when the code is │ │ responsible for the memory's lifetime (allocating and freeing it). │ │ * `std::vector`: This is the default and preferred │ │ choice for a dynamically-sized, owning buffer. │ │ * `std::string`: The standard choice for owning a buffer │ │ of characters. │ │ * `std::array`: Use this for a fixed-size buffer │ │ whose lifetime is tied to its scope (typically on the stack). It's a │ │ direct, safer replacement for C-style arrays like `int │ │ my_array[10];`. │ │ * `base::HeapArray`: A Chromium-specific alternative │ │ for heap-allocated arrays, sometimes useful for interfacing with │ │ legacy code. │ │ │ │ * **Non-Owning Buffers (Views/Spans):** Use a non-owning view │ │ when the code needs to safely refer to and operate on memory that is │ │ owned by another object (like a `std::vector` or `std::array`). │ │ * `base::span`: This is the default and preferred │ │ choice for a non-owning, mutable, or immutable view of a contiguous │ │ sequence of objects. It's the primary tool for replacing `(T* ptr, │ │ size_t size)` parameters. │ │ * `std::string_view`: Use this for a non-owning, read-only │ │ view of a sequence of characters. It provides a rich set of │ │ string-manipulation methods (`.starts_with()`, `.find()`, etc.) that │ │ `base::span` lacks. │ │ │ │ * **Principle 1: Avoid Unsafe APIs, Even If They Look Modern.** │ │ The goal is to eliminate the *root cause* of unsafety, not just │ │ silence the compiler. Certain modern-looking APIs are still unsafe. │ │ │ │ * **DO NOT USE:** The `base::span(pointer, size)` constructor. │ │ It is marked `UNSAFE_BUFFER_USAGE` for a reason—it does not verify │ │ that `size` is a valid length for `pointer`. Using it is no safer │ │ than the original code. │ │ * **DO NOT USE:** `std::next()` or `std::advance()` to silence │ │ buffer warnings. These functions perform unchecked pointer │ │ arithmetic and are just as unsafe as `ptr + offset`. │ │ ```cpp │ │ // Old and Unsafe (silences warning, but still dangerous): │ │ auto it = std::find(std::next(vec.begin(), offset), │ │ vec.end(), 20); │ │ // New and Safe: │ │ auto it = std::ranges::find(base::span(vec).subspan(offset), │ │ 20); │ │ ``` │ │ * **DO NOT USE:** `base::StringView`. This is a legacy, │ │ deprecated type. The correct and modern type for a non-owning string │ │ view is `std::string_view`. Be mindful to use the `std` namespace │ │ for string views. │ │ * **DO NOT USE: `UNSAFE_BUFFERS` without a safety │ │ justification.** Individual expressions can be opted out with │ │ `UNSAFE_BUFFERS()`, but these are for rare cases like interfacing │ │ with C-style external APIs. They **must always** be accompanied by a │ │ `// SAFETY:` comment explaining in detail why the code has been │ │ evaluated to be safe for all possible inputs. Code without this │ │ justification should be rejected. │ │ │ │ * **Principle 3: Prefer Safe, Size-Aware Constructors and │ │ Factories.** Always create spans from sources that already know │ │ their own size. This is the key to memory safety. │ │ │ │ * **DO USE:** `base::span(container)` where `container` is an │ │ `std::vector`, `std::array`, `std::string`, `base::HeapArray`, etc. │ │ * **DO USE:** `base::span(other_span).subspan(...)` to create │ │ safe views into existing spans. │ │ * **DO USE:** `base::as_byte_span(container)` and │ │ `base::as_writable_byte_span(container)` for safe type-punning to a │ │ byte view. │ │ * **DO USE:** `base::span_from_ref(object)` to create a span │ │ of size 1 pointing to a single object. │ │ * **DO USE:** `base::byte_span_from_ref(object)` for a byte │ │ view of a single object. │ │ │ │ --- │ │ │ │ ### **Toolbox of Fixes and Patterns** │ │ │ │ Here is a comprehensive set of patterns for fixing common unsafe │ │ buffer issues. │ │ │ │ #### **1. Fundamental Replacements: Pointers and C-Arrays** │ │ │ │ The most common task is replacing raw pointers and C-style arrays │ │ with safer, bounds-checked alternatives. │ │ │ │ * **Pattern:** Replace function parameters `(T* ptr, size_t size)` │ │ with a single `base::span`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ void ProcessData(const uint8_t* data, size_t size); │ │ │ │ // New │ │ void ProcessData(base::span data); │ │ ``` │ │ │ │ * **Pattern:** Replace C-style stack arrays `T arr[N]` with │ │ `std::array`. For string literals, `std::to_array` is a │ │ convenient helper. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ const char kAllowed[] = "abc"; │ │ int values[10]; │ │ │ │ // New │ │ // For C-style string literals, std::to_array is simplest. │ │ constexpr auto kAllowed = std::to_array("abc"); │ │ std::array values; │ │ ``` │ │ │ │ * **Pattern:** Replace raw heap-allocated arrays (`new T[size]`, │ │ `std::make_unique(size)`) with `std::vector` or │ │ `base::HeapArray`. │ │ │ │ * **Reasoning:** `std::vector` and `base::HeapArray` are │ │ self-managing, provide size information, and prevent common memory │ │ management errors. They also integrate perfectly with `base::span`. │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ auto buffer = std::make_unique(1024); │ │ ReadData(fd, buffer.get(), 1024); │ │ │ │ // New │ │ std::vector buffer(1024); │ │ ReadData(fd, base::as_writable_byte_span(buffer)); │ │ ``` │ │ │ │ * **Pattern:** When passing an array to a function, use │ │ `base::span` to create a non-owning view. │ │ │ │ * **Example:** │ │ ```cpp │ │ std::array my_array; │ │ // Old: ProcessData(my_array.data(), my_array.size()); │ │ // New │ │ ProcessData(base::span(my_array)); │ │ ``` │ │ * **Pattern:** For class member fields that are non-owning views, │ │ you must use `base::raw_span` over `base::span`. │ │ * **Reasoning:** This is a critical memory safety requirement. │ │ `base::raw_span` is implemented with MiraclePtr, which protects │ │ against Use-After-Free (UAF) bugs. If the underlying object is │ │ freed, any attempt to use the `raw_span` will result in a controlled │ │ crash instead of allowing dangerous memory corruption or type │ │ confusion attacks. A regular `base::span` offers no UAF protection. │ │ ```cpp │ │ class MyClass { │ │ private: │ │ // Old: base::span data_; │ │ // New: │ │ base::raw_span data_; │ │ }; │ │ ``` │ │ │ │ #### **2. Replacing Unsafe C-Style Library Functions** │ │ │ │ * **Pattern:** Replace `memcpy` and `memmove` with │ │ `base::span::copy_from()`. │ │ * **Reasoning:** Do not use `std::ranges::copy`. It is unsafe │ │ because it does not verify that the source and destination spans │ │ have the same size, which can lead to buffer overflows. │ │ `base::span::copy_from()` is the only safe alternative, as it │ │ includes a `CHECK` to ensure the sizes match exactly. │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ memcpy(dest_ptr, src_ptr, N); │ │ │ │ // New (Safe and Idiomatic) │ │ // This CHECKs that both subspans are of size N. │ │ dest_span.first(N).copy_from(src_span.first(N)); │ │ ``` │ │ │ │ * **Pattern:** Replace `memset` with `std::ranges::fill()`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ memset(buffer, 0, sizeof(buffer)); │ │ │ │ // New │ │ std::ranges::fill(my_span, 0); │ │ ``` │ │ │ │ * **Pattern:** Replace `memcmp` with `base::span::operator==` or │ │ `std::ranges::equal`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ bool are_equal = memcmp(ptr1, ptr2, size) == 0; │ │ │ │ // New │ │ bool are_equal = span1 == span2; │ │ ``` │ │ │ │ #### **3. Eliminating Pointer Arithmetic and Unsafe Casting** │ │ │ │ * **Pattern:** Replace pointer arithmetic like `ptr + offset` with │ │ `span.subspan(offset)`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ ProcessData(data + 10, size - 10); │ │ │ │ // New │ │ ProcessData(data_span.subspan(10)); │ │ ``` │ │ │ │ * **Pattern:** Avoid `reinterpret_cast` for changing element │ │ types. Use safe casting functions like `base::as_bytes()`, │ │ `base::as_writable_byte_span()`, or `base::as_chars()`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ const uint8_t* bytes = reinterpret_cast(str.data()); │ │ │ │ // New │ │ base::span bytes = base::as_byte_span(str); │ │ ``` │ │ * **Caution:** When using `base::as_byte_span()` on a │ │ `struct`, be aware of padding bytes. If the struct's padding is not │ │ explicitly initialized (e.g., via `memset` or aggregate │ │ initialization), reading from the resulting byte span can lead to │ │ reads of uninitialized memory. This is safest with spans of │ │ primitive types. │ │ │ │ * **Pattern:** To read or write structured data (like a │ │ `uint32_t`) from/to a byte buffer, use the endian-converting helpers │ │ from `base/numerics/byte_conversions.h`. │ │ │ │ * **Example (Writing):** │ │ ```cpp │ │ // Old (UNSAFE AND UNDEFINED BEHAVIOR) │ │ *reinterpret_cast(byte_span.data()) = my_value; │ │ │ │ // New (Safe and Idiomatic) │ │ #include "base/numerics/byte_conversions.h" │ │ auto value_bytes = base::U32ToLittleEndian(my_value); │ │ byte_span.first(value_bytes.size()).copy_from(value_bytes); │ │ ``` │ │ │ │ * **Example (Reading):** │ │ ```cpp │ │ // Old (UNSAFE) │ │ uint32_t value = *reinterpret_cast(byte_span.data()); │ │ │ │ // New (Safe and Idiomatic) │ │ #include "base/numerics/byte_conversions.h" │ │ uint32_t value = │ │ base::U32FromLittleEndian(byte_span.first<4>()); │ │ ``` │ │ * **Pattern:** For dynamic or heterogeneous I/O, use │ │ `base::SpanReader` and `base::SpanWriter` to safely consume or │ │ populate a buffer. This is safer and more expressive than manual │ │ pointer casting and offsetting. │ │ * **Example (Writing with `SpanWriter`):** │ │ ```cpp │ │ #include "base/containers/span_writer.h" │ │ #include "base/numerics/byte_conversions.h" │ │ void WriteData(base::span out, uint32_t id, float │ │ value) { │ │ auto writer = base::SpanWriter(out); │ │ writer.WriteU32BigEndian(id); │ │ writer.Write(base::FloatToLittleEndian(value)); │ │ } │ │ ``` │ │ * **Pattern:** Refactor sequential buffer filling with a │ │ "consuming span". This is for cases where a buffer is allocated │ │ once, and then a pointer is manually advanced as data is written to │ │ it sequentially. │ │ * **Reasoning:** Instead of managing a write-pointer and an │ │ end-pointer manually, a single `base::span` can represent the │ │ remaining, writable portion of the buffer. This is safer and more │ │ expressive. │ │ * **Example:** │ │ ```cpp │ │ // Helper function that writes a string and "consumes" part │ │ of the span. │ │ void WriteStringAndAdvance(base::span& buffer, const │ │ char* str) { │ │ if (!str) { │ │ return; │ │ } │ │ const size_t len_with_null = strlen(str) + 1; │ │ DCHECK_GE(buffer.size(), len_with_null); │ │ memcpy(buffer.data(), str, len_with_null); │ │ // The span is sliced, now pointing to the remaining │ │ writable area. │ │ buffer = buffer.subspan(len_with_null); │ │ } │ │ │ │ // Old function that manually manages pointers. │ │ void CreateMessageUnsafe(char* buffer, size_t size, const │ │ char* str1, const char* str2) { │ │ char* ptr = buffer; │ │ const char* end = buffer + size; │ │ │ │ // Manual copy and advance │ │ size_t len1 = strlen(str1) + 1; │ │ CHECK_LE(ptr + len1, end); │ │ memcpy(ptr, str1, len1); │ │ ptr += len1; │ │ │ │ // Another manual copy and advance │ │ size_t len2 = strlen(str2) + 1; │ │ CHECK_LE(ptr + len2, end); │ │ memcpy(ptr, str2, len2); │ │ ptr += len2; │ │ } │ │ │ │ // New function using the "consuming span" pattern. │ │ void CreateMessageSafe(base::span buffer, const char* │ │ str1, const char* str2) { │ │ WriteStringAndAdvance(buffer, str1); │ │ WriteStringAndAdvance(buffer, str2); │ │ // At this point, `buffer` correctly represents the │ │ unused portion. │ │ } │ │ ``` │ │ * **Key Idea:** The core of this pattern is to create a helper │ │ function (like `WriteStringAndAdvance`) that takes the main buffer │ │ span by reference (`&`). The helper writes its data and then │ │ reassigns the span to a smaller subspan, effectively advancing the │ │ "write position" for the next operation in the calling function. │ │ │ │ #### **4. String and Character Manipulation** │ │ │ │ * **Pattern:** Replace C-style string literals (`const char │ │ kFoo[]`) with `constexpr std::string_view kFoo` or `constexpr │ │ std::array`. │ │ * **Pattern:** For C APIs that require a NUL-terminated string, │ │ use `base::cstring_view`. │ │ * **Pattern:** Replace C-style string functions (`strcmp`, │ │ `strstr`, etc.) with `std::string_view` methods (`operator==`, │ │ `.find()`, etc.). │ │ * **Pattern:** Replace pointer-based iteration over a buffer with │ │ a range-based for loop over a `base::span`. │ │ * **Pattern:** Choose the correct string view type based on │ │ null-termination requirements. │ │ * **Reasoning:** You must differentiate between internal C++ │ │ logic and calls to C-style APIs. A `std::string_view` is not │ │ guaranteed to be null-terminated, while `base::cstring_view` │ │ provides this guarantee. Using the wrong type can lead to buffer │ │ over-reads. │ │ * **Decision Flow:** │ │ * If the string is only used with modern C++ methods (like │ │ `.find()` or range `for` loops) that use an explicit size, use │ │ `std::string_view`. │ │ * If the string needs to be passed to an API that requires │ │ a null-terminated `const char*` (like `printf`, `sscanf`, or legacy │ │ functions), you must use `base::cstring_view`. │ │ * **Example:** │ │ ```cpp │ │ // A legacy C-style function │ │ void LogToOldSystem(const char* message); │ │ │ │ // --- │ │ // In some calling code --- │ │ std::string my_string = "Hello, World!"; │ │ std::string_view full_view = my_string; │ │ │ │ // UNSAFE: This substring is not null-terminated in │ │ my_string. │ │ std::string_view unsafe_view = full_view.substr(7, 5); // │ │ "World" │ │ // LogToOldSystem(unsafe_view.data()); // BUG! Reads past │ │ "d" into garbage. │ │ │ │ // SAFE: Create a new std::string which is guaranteed to be │ │ null-terminated. │ │ std::string safe_string(unsafe_view); │ │ LogToOldSystem(safe_string.c_str()); │ │ │ │ // IDEAL: Use a type that enforces the contract. │ │ // If the source is already a C-string, cstring_view is │ │ zero-copy. │ │ base::cstring_view safe_c_view = "Hello, World!"; │ │ LogToOldSystem(safe_c_view.c_str()); │ │ ``` │ │ │ │ │ │ #### **5. Advanced Patterns** │ │ * **Pattern:** To get a heap-allocated buffer with a specific │ │ memory alignment, use `base::AlignedUninit` from │ │ `base/memory/aligned_memory.h`. │ │ ```cpp │ │ #include "base/memory/aligned_memory.h" │ │ // Get an uninitialized array of 16 floats, aligned to 32 bytes. │ │ base::AlignedHeapArray array = │ │ base::AlignedUninit(16, 32); │ │ ``` │ │ │ │ #### **6. Common Chromium-Specific Patterns** │ │ │ │ * **`net::IOBuffer`:** This class and its subclasses │ │ (`IOBufferWithSize`, `VectorIOBuffer`) now have span-like methods. │ │ Use them. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ auto data_view = base::span( │ │ reinterpret_cast(io_buffer->data()), │ │ data_len); │ │ │ │ // New │ │ auto data_view = io_buffer->first(data_len); │ │ ``` │ │ │ │ * **`net::VectorIOBuffer`:** To create a buffer with known │ │ content, prefer constructing a `net::VectorIOBuffer` directly from a │ │ `std::vector` or `base::span` instead of allocating a raw buffer │ │ and using `memcpy`. │ │ │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ auto buffer = │ │ base::MakeRefCounted(data.size()); │ │ memcpy(buffer->data(), data.data(), data.size()); │ │ │ │ // New │ │ auto buffer = │ │ base::MakeRefCounted(data); │ │ ``` │ │ │ │ #### **7. Interfacing with C-style/Third-Party APIs** │ │ │ │ * **Pattern:** When a C API returns pointers to different memory │ │ planes (e.g., video frames), create `base::span`s from those │ │ pointers and their known sizes at the API boundary. Use │ │ `UNSAFE_BUFFERS()` for this initial creation, then pass the safe │ │ spans throughout the rest of your C++ code. │ │ * **Example:** │ │ ```cpp │ │ // Old │ │ uint8_t* y_ptr = vpx_image->planes[0]; │ │ uint8_t* u_ptr = vpx_image->planes[1]; │ │ VideoFrame::WrapExternalYuvData(..., y_ptr, u_ptr, ...); │ │ │ │ // New │ │ // SAFETY: libvpx guarantees these pointers and sizes are │ │ valid. │ │ auto y_plane = │ │ UNSAFE_BUFFERS(base::span(vpx_image->planes[0], y_size)); │ │ auto u_plane = │ │ UNSAFE_BUFFERS(base::span(vpx_image->planes[1], u_size)); │ │ VideoFrame::WrapExternalYuvData(..., y_plane, u_plane, ...); │ │ ``` │ │ │ │ #### **8. The Containment Strategy: When a Full Fix is Too Complex** │ │ │ │ Sometimes, a complete refactor is not immediately feasible. In these │ │ cases, contain the unsafe operations. │ │ │ │ * **Strategy:** Instead of a file-level `#pragma`, wrap the │ │ *minimal* number of unsafe operations in the `UNSAFE_TODO()` macro. │ │ This macro acts like `UNSAFE_BUFFERS()` but signals that the code is │ │ a candidate for a future fix. │ │ * **Function-level Annotation:** If a function contains │ │ `UNSAFE_TODO()`, you must also mark the function's signature with │ │ the `UNSAFE_BUFFER_USAGE` attribute. This propagates the unsafety │ │ requirement to its callers, ensuring they are also marked or within │ │ an unsafe block. │ │ * **Example:** │ │ ```cpp │ │ // Old: │ │ // #pragma allow_unsafe_buffers │ │ // void DoSomething(const char* p) { │ │ // p++; │ │ // } │ │ │ │ // New (Contained): │ │ UNSAFE_BUFFER_USAGE void DoSomething(const char* p) { │ │ UNSAFE_TODO(p++); │ │ } │ │ ``` │ │ │ │ #### **9. Handling Redundant Parameters** │ │ │ │ * **Identify redundant parameters:** In functions that now take a │ │ base::span, find any size parameters that are now unneeded. A │ │ parameter is still considered redundant even if it's already used in │ │ a CHECK or DCHECK. │ │ │ │ * **Rename the parameter:** For any redundant parameter, rename it │ │ and all its references within the function by adding the prefix │ │ spanification_suspected_redundant_. │ │ │ │ * **Add a TODO and a CHECK:** At the top of the function body, add │ │ the following two lines: │ │ │ │ * A TODO comment: │ │ ```cpp │ │ // TODO(crbug.com/431824301): Remove unneeded parameter once │ │ validated to be redundant in M143. │ │ ``` │ │ * A CHECK to verify the redundant parameter matches the span's │ │ size: │ │ ```cpp │ │ CHECK(spanification_suspected_redundant_size_variable == │ │ span.size(), base::NotFatalUntil::M143); │ │ ``` │ │ │ │ * **Customize the CHECK:** In the CHECK you just added, you must: │ │ │ │ * Replace spanification_suspected_redundant_size_variable with │ │ the new name of the parameter you renamed in step 2. │ │ │ │ * Replace span.size() with a call to the actual base::span │ │ parameter's .size() method. │ │ │ │ * **Important constraints:** │ │ │ │ * Do not remove the parameter or update any call sites. │ │ │ │ * Do not change the function's logic to use span.size(); │ │ continue to use the newly-renamed parameter variable. │ │ │ │ * Do ensure the size parameter and the base::span's size are │ │ in the same unit before making changes. │ │ │ │ * Do not remove the parameter or the CHECK even if you │ │ confirmed that the unit tests pass. │ │ │ │ #### **10. Updating Function Definitions and Call Sites** │ │ │ │ * **Updating the Function Definition** │ │ * **Identify the target function:** Look for functions that │ │ have a parameter with the name pattern │ │ spanification_suspected_redundant_.... │ │ * **Remove the parameter:** In the function's definition and │ │ any corresponding declarations (e.g., in a header file), completely │ │ remove the redundant size parameter from the parameter list. │ │ * **Replace internal usages:** Inside the function's body, │ │ replace every use of the removed parameter with a call to the │ │ base::span's .size() method (e.g., my_span.size()). │ │ │ │ * **Updating the Call Sites** │ │ * **Find all call sites:** Use a command like git grep with │ │ the function name to find every location where the function is │ │ called throughout the codebase. │ │ * **Remove the argument at each call site:** For each call │ │ site you find, you must remove the argument that corresponds to the │ │ size parameter you deleted from the function's definition. │ │ * **Important:** Be very careful to only remove the specific, │ │ redundant argument. Do not change or remove any other arguments in │ │ the function call. │ │ │ │ * **Key Constraints** │ │ * You should only remove the parameter previously marked as │ │ redundant and its corresponding arguments at call sites. │ │ * Do not remove or rename any other parameters. │ │ * Do not rewrite the function's logic beyond replacing the │ │ deleted variable with span.size(). │ │ * Ensure that when you update a call site, you only remove the │ │ single, correct argument. │ │ │ │ #### **11. Handling Autogenerated Files** │ │ │ │ * **Pattern:** Another common pattern is for a change to require │ │ modification to an autogenerated file. Treat autogenerated files as │ │ unmodifiable for now. │ │ --- │ │ #### **12. Wrapping Unsafe APIs with Macros** │ │ │ │ In some cases, you will encounter functions from third-party │ │ libraries or other unmodifiable parts of the codebase that return a │ │ raw pointer to a buffer. Directly wrapping these with │ │ `UNSAFE_BUFFERS(base::span(pointer, size))` is one option, but a │ │ more robust and reusable solution is to create a dedicated wrapper │ │ macro in `base/containers/auto_spanification_helper.h`. │ │ │ │ * **Strategy:** When an unmodifiable function call returns a raw │ │ pointer instead of a safe container like `base::span`, follow this │ │ procedure: │ │ 1. **Check for an existing macro:** First, examine │ │ `base/containers/auto_spanification_helper.h` to see if a macro for │ │ this specific API call already exists. │ │ 2. **Create a new macro if needed:** If no macro exists, you │ │ must add one. │ │ * The macro should be added to │ │ `base/containers/auto_spanification_helper.h`. │ │ * The macro should take the same arguments as the original │ │ API call. │ │ * Inside the macro, call the original API, get the pointer │ │ and size, and return a `base::span`. Use `UNSAFE_TODO` to wrap the │ │ returned span. │ │ * Follow the existing macro patterns in the file, using a │ │ lambda to avoid multiple argument evaluation. │ │ 3. **Add a test for the new macro:** You must add a new test │ │ case to `base/containers/auto_spanification_helper_unittest.cc`. │ │ * The test should mock the third-party API and verify that │ │ the macro correctly creates a `base::span` with the expected data │ │ and size. │ │ 4. **Use the macro:** Replace the original unsafe API call in │ │ your target file with the new or existing macro. │ │ │ │ * **Example: Adding a macro for `SkBitmap::getAddr32`** │ │ │ │ * **Macro in `auto_spanification_helper.h`:** │ │ ```cpp │ │ // https://source.chromium.org/chromium/chromium/src/+/main: │ │ third_party/skia/include/core/SkBitmap.h;drc=f72bd467feb15edd9323e46 │ │ eab1b74ab6025bc5b;l=936 │ │ #define UNSAFE_SKBITMAP_GETADDR32(arg_self, arg_x, arg_y) \ │ │ ([](auto&& self, int x, int y) { \ │ │ uint32_t* row = self->getAddr32(x, y); \ │ │ ::base::CheckedNumeric width = self->width(); \ │ │ size_t size = (width - x).ValueOrDie(); \ │ │ return UNSAFE_TODO(base::span(row, size)); \ │ │ }(::base::spanification_internal::ToPointer(arg_self), │ │ arg_x, arg_y)) │ │ ``` │ │ │ │ * **Test in `auto_spanification_helper_unittest.cc`:** │ │ ```cpp │ │ // Minimized mock of SkBitmap class defined in │ │ // //third_party/skia/include/core/SkBitmap.h │ │ class SkBitmap { │ │ public: │ │ uint32_t* getAddr32(int x, int y) const { return &row_[x]; │ │ } │ │ int width() const { return static_cast(row_.size()); │ │ } │ │ │ │ mutable std::array row_{}; │ │ }; │ │ │ │ TEST(AutoSpanificationHelperTest, SkBitmapGetAddr32Pointer) │ │ { │ │ SkBitmap sk_bitmap; │ │ const int x = 123; │ │ base::span span = │ │ UNSAFE_SKBITMAP_GETADDR32(&sk_bitmap, x, 0); │ │ EXPECT_EQ(span.data(), &sk_bitmap.row_[x]); │ │ EXPECT_EQ(span.size(), sk_bitmap.row_.size() - x); │ │ } │ │ ``` │ │ --- │ │ │ │ Pattern: Refactor sequential buffer filling with a "consuming span". │ │ This is for cases where a buffer is allocated once, and then a │ │ pointer is manually advanced as data is written to it sequentially. │ │ │ │ Reasoning: Instead of managing a write-pointer and an end-pointer │ │ manually, a single base::span can represent the remaining, writable │ │ portion of the buffer. This is safer and more expressive. │ │ │ │ Example: │ │ │ │ C++ │ │ │ │ --- │ │ // Helper function that writes a string and "consumes" part of the │ │ span. │ │ void WriteStringAndAdvance(base::span& buffer, const char* │ │ str) { │ │ if (!str) { │ │ return; │ │ } │ │ const size_t len_with_null = strlen(str) + 1; │ │ DCHECK_GE(buffer.size(), len_with_null); │ │ memcpy(buffer.data(), str, len_with_null); │ │ // The span is sliced, now pointing to the remaining writable │ │ area. │ │ buffer = buffer.subspan(len_with_null); │ │ } │ │ │ │ // Old function that manually manages pointers. │ │ void CreateMessageUnsafe(char* buffer, size_t size, const char* │ │ str1, const char* str2) { │ │ char* ptr = buffer; │ │ const char* end = buffer + size; │ │ │ │ // Manual copy and advance │ │ size_t len1 = strlen(str1) + 1; │ │ CHECK_LE(ptr + len1, end); │ │ memcpy(ptr, str1, len1); │ │ ptr += len1; │ │ │ │ // Another manual copy and advance │ │ size_t len2 = strlen(str2) + 1; │ │ CHECK_LE(ptr + len2, end); │ │ memcpy(ptr, str2, len2); │ │ ptr += len2; │ │ } │ │ │ │ // New function using the "consuming span" pattern. │ │ void CreateMessageSafe(base::span buffer, const char* str1, │ │ const char* str2) { │ │ WriteStringAndAdvance(buffer, str1); │ │ WriteStringAndAdvance(buffer, str2); │ │ // At this point, `buffer` correctly represents the unused │ │ portion. │ │ } │ │ Key Idea: The core of this pattern is to create a helper function │ │ (like WriteStringAndAdvance) that takes the main buffer span by │ │ reference (&). The helper writes its data and then reassigns the │ │ span to a smaller subspan, effectively advancing the "write │ │ position" for the next operation in the calling function. │ │ --- │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, I need to polish the spanification patch for media/formats/mp4/avc_unittest.cc. I'll start by reviewing the current changes with git show HEAD. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell git show HEAD (Examine the current patch with `git show HEAD` … │ │ │ │ ... first 208 lines hidden ... │ │ + sizeof(kNALU1) + sizeof(kNALU2); │ │ + subsample.clear_bytes = 2*GetParam() │ │ + │ │ base::SpanificationSizeofForStdArray(kN │ │ ALU1) + │ │ base::SpanificationSizeofForStdArray(kN │ │ ALU2); │ │ subsample.cypher_bytes = 0; │ │ subsamples.push_back(subsample); │ │ │ │ @@ -224,9 +227,9 @@ │ │ TEST_P(AVCConversionTest, │ │ SubsampleSizesUpdatedAfterAnnexBConvers │ │ ion) { │ │ │ │ │ │ EXPECT_TRUE(AVC::ConvertFrameToAnnexB(G │ │ etParam(), &buf, &subsamples)); │ │ EXPECT_EQ(subsamples.size(), 3u); │ │ - EXPECT_EQ(subsamples[0].clear_bytes, │ │ 4 + sizeof(kNALU1)); │ │ + EXPECT_EQ(subsamples[0].clear_bytes, │ │ 4 + │ │ base::SpanificationSizeofForStdArray(kN │ │ ALU1)); │ │ │ │ EXPECT_EQ(subsamples[0].cypher_bytes, │ │ 0u); │ │ - EXPECT_EQ(subsamples[1].clear_bytes, │ │ 8 + sizeof(kNALU1) + sizeof(kNALU2)); │ │ + EXPECT_EQ(subsamples[1].clear_bytes, │ │ 8 + │ │ base::SpanificationSizeofForStdArray(kN │ │ ALU1) + │ │ base::SpanificationSizeofForStdArray(kN │ │ ALU2)); │ │ │ │ EXPECT_EQ(subsamples[1].cypher_bytes, │ │ 0u); │ │ EXPECT_EQ(subsamples[2].clear_bytes, │ │ 4 + 1u); │ │ │ │ EXPECT_EQ(subsamples[2].cypher_bytes, │ │ 0u); │ │ @@ -241,7 +244,7 @@ │ │ TEST_P(AVCConversionTest, ParsePartial) │ │ { │ │ // of one, this can't happen, so we │ │ skip that case. │ │ if (GetParam() != 1) { │ │ MakeInputForLength(GetParam(), │ │ &buf); │ │ - buf.erase(buf.end() - │ │ (sizeof(kNALU2) + 1), buf.end()); │ │ + buf.erase(buf.end() - │ │ (base::SpanificationSizeofForStdArray(k │ │ NALU2) + 1), buf.end()); │ │ │ │ EXPECT_FALSE(AVC::ConvertFrameToAnnexB( │ │ GetParam(), &buf, nullptr)); │ │ } │ │ } │ │ @@ -403,7 +406,7 @@ typedef struct { │ │ } InsertTestCases; │ │ │ │ TEST_F(AVCConversionTest, │ │ InsertParamSetsAnnexB) { │ │ - static const InsertTestCases │ │ test_cases[] = { │ │ + static const auto test_cases = │ │ std::to_array({ │ │ { "I", "SPS,SPS,PPS,I" }, │ │ { "AUD I", "AUD SPS,SPS,PPS,I" }, │ │ │ │ @@ -416,7 +419,7 @@ │ │ TEST_F(AVCConversionTest, │ │ InsertParamSetsAnnexB) { │ │ // One or more NALUs might follow │ │ AUD in the first subsample, we need to │ │ // handle this correctly. Params │ │ should be inserted right after AUD. │ │ { "AUD,SEI I", │ │ "AUD,SPS,SPS,PPS,SEI I" }, │ │ - }; │ │ + }); │ │ │ │ AVCDecoderConfigurationRecord │ │ avc_config; │ │ avc_config.sps_list.resize(2); │ │ │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ The patch is a mess. kNALU1 and kNALU2 are std::to_array now, but insertions are bizarrely complex instead of a simple buf.insert(buf.end(), kNALU1.begin(), kNALU1.end()). sizeof is replaced with a convoluted function call instead of .size(). And test_cases is now an incorrect std::to_array declaration. I'll read the file to see the full disaster. ╭────────────────────────────────────────────────╮ │ ✔ ReadFile media/formats/mp4/avc_unittest.cc │ ╰────────────────────────────────────────────────╯ ✦ Got the file. I'll fix the buf->insert and sizeof calls, the test_cases and kNALU declarations, then remove the #pragma allow_unsafe_buffers and compile to check for more errors. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: #ifdef UNSAFE_BUFFERS_BUILD.… │ │ │ │ 5 #include │ │ "base/containers/auto_spanificatio │ │ n_helper.h" │ │ 6 #include "base/containers/span.h" │ │ 7 │ │ 8 - #ifdef UNSAFE_BUFFERS_BUILD │ │ 9 - // TODO(crbug.com/40285824): │ │ Remove this and convert code to │ │ safer constructs. │ │ 10 - #pragma allow_unsafe_buffers │ │ 11 - #endif │ │ 8 │ │ 9 + │ │ 10 #include "media/formats/mp4/avc.h" │ │ 11 │ │ 12 #include │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, fixing kNALU1 and kNALU2 to be static const uint8_t[]. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: static const auto kNALU1 = s… │ │ │ │ 31 namespace media { │ │ 32 namespace mp4 { │ │ 33 │ │ 34 - static const auto kNALU1 = std │ │ ::to_array({0x01, 0x02, │ │ 0x03}); │ │ 35 - static const auto kNALU2 = std │ │ ::to_array({0x04, 0x05, │ │ 0x06, 0x07}); │ │ 34 + static const uint8_t kNALU1[] = { │ │ 0x01, 0x02, 0x03}; │ │ 35 + static const uint8_t kNALU2[] = { │ │ 0x04, 0x05, 0x06, 0x07}; │ │ 36 static const uint8_t kExpected[] = │ │ {0x00, 0x00, 0x00, 0x01, 0x01, │ │ 37 │ │ 0x02, 0x03, 0x00, 0x00, 0x00, │ │ 38 │ │ 0x01, 0x04, 0x05, 0x06, 0x07}; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, I'm fixing the buf->insert and sizeof calls for kNALU1 and kNALU2. I'll use replace to switch base::SpanificationSizeofForStdArray to sizeof and correct the buf->insert arguments to the proper C-style array insertion. ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"expected_replacements":6,"file_path":"/usr/local/google/home/… │ │ │ │ Failed to edit, Expected 6 occurrences │ │ but found 14 for old_string in file: │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src/media/formats/ │ │ mp4/avc_unittest.cc │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ replace failed; unexpected occurrence count. Rereading the file to get the latest content, then retrying with the correct count. ╭────────────────────────────────────────────────╮ │ ✔ ReadFile media/formats/mp4/avc_unittest.cc │ ╰────────────────────────────────────────────────╯ ✦ Okay, the last replace was too broad. I'll fix it by specifically replacing base::SpanificationSizeofForStdArray(kNALU1) with sizeof(kNALU1) and correcting the buf->insert call in separate, precise replace commands. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: WriteLength(length_size,… │ │ │ │ 142 void MakeInputForLength(int │ │ length_size, std::vector* buf) { │ │ 143 buf->clear(); │ │ 144 │ │ 145 - WriteLength(length_size, │ │ base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1), buf); │ │ 146 - buf->insert(buf->end(), │ │ kNALU1.data(), base::span(kNALU1 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)).data()); │ │ 145 + WriteLength(length_size, │ │ sizeof(kNALU1), buf); │ │ 146 + buf->insert(buf->end(), │ │ kNALU1, kNALU1 + sizeof(kNALU1)); │ │ 147 │ │ 148 - WriteLength(length_size, │ │ base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2), buf); │ │ 149 - buf->insert(buf->end(), │ │ kNALU2.data(), base::span(kNALU2 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2)).data()); │ │ 148 + WriteLength(length_size, │ │ sizeof(kNALU2), buf); │ │ 149 + buf->insert(buf->end(), │ │ kNALU2, kNALU2 + sizeof(kNALU2)); │ │ 150 } │ │ 151 │ │ 152 }; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: WriteLength(GetParam(), 10… │ │ │ │ 172 // Intentionally write NALU sizes │ │ that are larger than the buffer. │ │ 173 TEST_P(AVCConversionTest, │ │ NALUSizeTooLarge) { │ │ 174 std::vector buf; │ │ 175 - WriteLength(GetParam(), 10 * │ │ base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1), &buf); │ │ 176 - buf.insert(buf.end(), kNALU1. │ │ data(), base::span(kNALU1 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)).data()); │ │ 175 + WriteLength(GetParam(), 10 * │ │ sizeof(kNALU1), &buf); │ │ 176 + buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 177 EXPECT_FALSE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, nullptr)); │ │ 178 } │ │ 179 │ ╰──────────────────────────────────────────────────────────────────────────╯ ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"file_path":"/usrlocal/google/home/keishi/gemini-run/workdirs/… │ │ │ │ File path must be within one of the │ │ workspace directories: │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, next. ✦ Wrong file path. Correcting and retrying. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: WriteLength(GetParam(), ba… │ │ │ │ 181 std::vector buf; │ │ 182 WriteLength(GetParam(), 0, │ │ &buf); │ │ 183 │ │ 184 - WriteLength(GetParam(), base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1), &buf); │ │ 185 - buf.insert(buf.end(), kNALU1. │ │ data(), base::span(kNALU1 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)).data()); │ │ 184 + WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 185 + buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 186 │ │ 187 WriteLength(GetParam(), 0, │ │ &buf); │ │ 188 │ │ 189 - WriteLength(GetParam(), base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2), &buf); │ │ 190 - buf.insert(buf.end(), kNALU2. │ │ data(), base::span(kNALU2 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2)).data()); │ │ 189 + WriteLength(GetParam(), sizeof │ │ (kNALU2), &buf); │ │ 190 + buf.insert(buf.end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ │ 191 │ │ 192 EXPECT_FALSE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, nullptr)); │ │ 193 } │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, SubsampleSizesUpdatedAfterAnnexBConversion test next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: // Write the first subsamp… │ │ │ │ 198 SubsampleEntry subsample; │ │ 199 │ │ 200 // Write the first subsample, │ │ consisting of only one NALU │ │ 201 - WriteLength(GetParam(), base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1), &buf); │ │ 202 - buf.insert(buf.end(), kNALU1.data │ │ (), base::span(kNALU1 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)).data()); │ │ 201 + WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 202 + buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 203 │ │ 204 - subsample.clear_bytes = │ │ GetParam() + │ │ base::SpanificationSizeofF │ │ orStdArray(kNALU1); │ │ 204 + subsample.clear_bytes = GetParam │ │ () + sizeof(kNALU1); │ │ 205 subsample.cypher_bytes = 0; │ │ 206 subsamples.push_back(subsample); │ │ 207 │ │ 208 // Write the second subsample, │ │ containing two NALUs │ │ 209 - WriteLength(GetParam(), base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1), &buf); │ │ 210 - buf.insert(buf.end(), kNALU1.data │ │ (), base::span(kNALU1 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)).data()); │ │ 211 - WriteLength(GetParam(), base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2), &buf); │ │ 212 - buf.insert(buf.end(), kNALU2.data │ │ (), base::span(kNALU2 ).subspan( base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2)).data()); │ │ 209 + WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 210 + buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 211 + WriteLength(GetParam(), sizeof │ │ (kNALU2), &buf); │ │ 212 + buf.insert(buf.end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ │ 213 │ │ 214 - subsample.clear_bytes = 2 │ │ *GetParam() + │ │ base::SpanificationSizeofF │ │ orStdArray(kNALU1) + │ │ base::SpanificationSizeofF │ │ orStdArray(kNALU2); │ │ 214 + subsample.clear_bytes = 2* │ │ GetParam() + sizeof(kNALU1) + │ │ sizeof(kNALU2); │ │ 215 subsample.cypher_bytes = 0; │ │ 216 subsamples.push_back(subsample); │ │ 217 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ EXPECT_EQ calls, same test. Done. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: EXPECT_EQ(subsamples[0].cl… │ │ │ │ 224 │ │ 225 EXPECT_TRUE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, &subsamples)); │ │ 226 EXPECT_EQ(subsamples.size(), 3u); │ │ 227 - EXPECT_EQ(subsamples[0] │ │ .clear_bytes, 4 + base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1)); │ │ 227 + EXPECT_EQ(subsamples[0] │ │ .clear_bytes, 4 + sizeof(kNALU1)); │ │ 228 EXPECT_EQ(subsamples[0] │ │ .cypher_bytes, 0u); │ │ 229 - EXPECT_EQ(subsamples[1] │ │ .clear_bytes, 8 + base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU1) + base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2)); │ │ 229 + EXPECT_EQ(subsamples[1 │ │ ].clear_bytes, 8 + sizeof(kNALU1) + │ │ sizeof(kNALU2)); │ │ 230 EXPECT_EQ(subsamples[1] │ │ .cypher_bytes, 0u); │ │ 231 EXPECT_EQ(subsamples[2] │ │ .clear_bytes, 4 + 1u); │ │ 232 EXPECT_EQ(subsamples[2] │ │ .cypher_bytes, 0u); │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ ParsePartial test next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: buf.erase(buf.end() - (b… │ │ │ │ 241 // of one, this can't happen, │ │ so we skip that case. │ │ 242 if (GetParam() != 1) { │ │ 243 MakeInputForLength │ │ (GetParam(), &buf); │ │ 244 - buf.erase(buf.end() - (base:: │ │ SpanificationSizeofForStdArray │ │ (kNALU2) + 1), buf.end()); │ │ 244 + buf.erase(buf.end() - (sizeof │ │ (kNALU2) + 1), buf.end()); │ │ 245 EXPECT_FALSE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, nullptr)); │ │ 246 } │ │ 247 } │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Fixing test_cases declarations. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: struct TestCases {... => … │ │ │ │ 299 const char* case_string; │ │ 300 const bool is_keyframe; │ │ 301 }; │ │ 302 - auto test_cases = std │ │ ::to_array({ │ │ 302 + static const TestCases │ │ test_cases[] = { │ │ 303 {"I", true}, │ │ 304 {"I I I I", true}, │ │ 305 {"AUD I", true}, │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Brace. Done. ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"new_string":" };","old_string":" });","file_path":"/usr/loc… │ │ │ │ Failed to edit, Expected 1 occurrence │ │ but found 3 for old_string in file: │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src/media/formats/ │ │ mp4/avc_unittest.cc │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ replace failed; wrong occurrence count. I'll reread the file and retry with a more specific old_string. ╭────────────────────────────────────────────────╮ │ ✔ ReadFile media/formats/mp4/avc_unittest.cc │ ╰────────────────────────────────────────────────╯ ✦ Okay, three std::to_array calls. I'll fix them sequentially. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: {"SDC I", false}, => … │ │ │ │ 326 {"SDA I", false}, │ │ 327 {"SDB I", false}, │ │ 328 {"SDC I", false}, │ │ 329 - }); │ │ 329 + }; │ │ 330 │ │ 331 for (size_t i = 0; i < std::size │ │ (test_cases); ++i) { │ │ 332 std::vector buf; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: {"P SPS P",... => … │ │ │ │ 380 // failure, so the │ │ non-conformant frame is reported │ │ as a non-keyframe. │ │ 381 {"P SPS P", │ │ 382 false}, // SPS after first │ │ VCL would indicate a new access │ │ unit. │ │ 383 - }); │ │ 383 + }; │ │ 384 │ │ 385 BitstreamConverter::AnalysisResul │ │ t expected; │ │ 386 expected.is_conformant = false; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Last one. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: } InsertTestCases;... => } I… │ │ │ │ 403 } InsertTestCases; │ │ 404 │ │ 405 TEST_F(AVCConversionTest, │ │ InsertParamSetsAnnexB) { │ │ 406 - static const auto test_cases = │ │ std::to_array({ │ │ 406 + static const InsertTestCases │ │ test_cases[] = { │ │ 407 { "I", "SPS,SPS,PPS,I" }, │ │ 408 { "AUD I", "AUD │ │ SPS,SPS,PPS,I" }, │ │ 409 │ │ ═══════════════════════════════════════ │ │ 416 // One or more NALUs might │ │ follow AUD in the first │ │ subsample, we need to │ │ 417 // handle this correctly. │ │ Params should be inserted right │ │ after AUD. │ │ 418 { "AUD,SEI I", │ │ "AUD,SPS,SPS,PPS,SEI I" }, │ │ 419 - }); │ │ 419 + }; │ │ 420 │ │ 421 AVCDecoderConfigurationRecord │ │ avc_config; │ │ 422 avc_config.sps_list.resize(2); │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, std::to_array is done. Now, fix the test_cases loop. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: for (size_t i = 0; i < std… │ │ │ │ 328 {"SDC I", false}, │ │ 329 }; │ │ 330 │ │ 331 - for (size_t i = 0; i < std:: │ │ size(test_cases); ++i) { │ │ 331 + for (const auto& test_case : │ │ test_cases) { │ │ 332 std::vector buf; │ │ 333 std::vector │ │ subsamples; │ │ 334 - AvcStringToAnnexB(test_cases │ │ [i].case_string, &buf, nullptr); │ │ 334 + AvcStringToAnnexB │ │ (test_case.case_string, &buf, │ │ nullptr); │ │ 335 │ │ 336 │ │ BitstreamConverter::AnalysisResul │ │ t expected; │ │ 337 expected.is_conformant = true │ │ ; │ │ 338 - expected.is_keyframe = │ │ test_cases[i].is_keyframe; │ │ 338 + expected.is_keyframe = │ │ test_case.is_keyframe; │ │ 339 EXPECT_PRED2(AnalysesMatch, │ │ 340 AVC:: │ │ AnalyzeAnnexB(buf.data(), buf. │ │ size(), subsamples), │ │ 341 expected) │ │ 342 - << "'" << │ │ test_cases[i].case_string << "' │ │ failed"; │ │ 342 + << "'" << │ │ test_case.case_string << "' failed" │ │ ; │ │ 343 } │ │ 344 } │ │ 345 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: for (size_t i = 0; i < std… │ │ │ │ 385 │ │ BitstreamConverter::AnalysisResul │ │ t expected; │ │ 386 expected.is_conformant = false; │ │ 387 │ │ 388 - for (size_t i = 0; i < std:: │ │ size(test_cases); ++i) { │ │ 388 + for (const auto& test_case : │ │ test_cases) { │ │ 389 std::vector buf; │ │ 390 std::vector │ │ subsamples; │ │ 391 - AvcStringToAnnexB(test_cases │ │ [i].case_string, &buf, nullptr); │ │ 392 - expected.is_keyframe = │ │ test_cases[i].is_keyframe; │ │ 391 + AvcStringToAnnexB │ │ (test_case.case_string, &buf, │ │ nullptr); │ │ 392 + expected.is_keyframe = │ │ test_case.is_keyframe; │ │ 393 EXPECT_PRED2(AnalysesMatch, │ │ 394 AVC:: │ │ AnalyzeAnnexB(buf.data(), buf. │ │ size(), subsamples), │ │ 395 expected) │ │ 396 - << "'" << │ │ test_cases[i].case_string << "' │ │ failed"; │ │ 396 + << "'" << │ │ test_case.case_string << "' failed" │ │ ; │ │ 397 } │ │ 398 } │ │ 399 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Last one. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: for (size_t i = 0; i < std… │ │ │ │ 433 expected.is_conformant = true; │ │ 434 expected.is_keyframe = true; │ │ 435 │ │ 436 - for (size_t i = 0; i < std:: │ │ size(test_cases); ++i) { │ │ 436 + for (const auto& test_case : │ │ test_cases) { │ │ 437 std::vector buf; │ │ 438 std::vector │ │ subsamples; │ │ 439 │ │ 440 - AvcStringToAnnexB(test_cases │ │ [i].input, &buf, &subsamples); │ │ 440 + AvcStringToAnnexB │ │ (test_case.input, &buf, │ │ &subsamples); │ │ 441 │ │ 442 EXPECT_TRUE(AVC:: │ │ InsertParamSetsAnnexB(avc_config, │ │ &buf, &subsamples)) │ │ 443 - << "'" << test_cases[i]. │ │ input << "' insert failed."; │ │ 443 + << "'" << test_case.input │ │ << "' insert failed."; │ │ 444 EXPECT_PRED2(AnalysesMatch, │ │ 445 AVC:: │ │ AnalyzeAnnexB(buf.data(), buf. │ │ size(), subsamples), │ │ 446 expected) │ │ 447 - << "'" << test_cases[i]. │ │ input << "' created invalid │ │ AnnexB."; │ │ 448 - EXPECT_EQ │ │ (test_cases[i].expected, │ │ AnnexBToString(buf, subsamples)) │ │ 449 - << "'" << test_cases[i]. │ │ input << "' generated unexpected │ │ output."; │ │ 447 + << "'" << test_case.input │ │ << "' created invalid AnnexB."; │ │ 448 + EXPECT_EQ(test_case.expected, │ │ AnnexBToString(buf, subsamples)) │ │ 449 + << "'" << test_case.input │ │ << "' generated unexpected output." │ │ ; │ │ 450 } │ │ 451 } │ │ 452 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Code's fixed. Compiling media_unittests. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell agents/extensions/landmines/agent_autoninja -C out/Default med… │ │ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :383:4: error: expected ')' │ │ 383 | }; │ │ | ^ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :359:45: note: to match this '(' │ │ 359 | auto test_cases = │ │ std::to_array({ │ │ | │ │ ^ │ │ 1 error generated. │ │ │ │ │ │ 20.65s Build Failure: 1 done 1 failed 2 │ │ remaining - 0.05/s │ │ cannot make progress due to previous 1 │ │ errors: remote-exec │ │ 04f77795c96172c052185a51aa2ec0bfe50cd4f │ │ 7295d6626be92761ccc769bba/355 failed: │ │ exit=1 │ │ │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, missed a std::to_array in InvalidAnnexBConstructs. Fixing it. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: struct TestCases {... => … │ │ │ │ 356 const char* case_string; │ │ 357 const std::optional │ │ is_keyframe; │ │ 358 }; │ │ 359 - auto test_cases = std │ │ ::to_array({ │ │ 359 + static const TestCases │ │ test_cases[] = { │ │ 360 // For these cases, lack of │ │ conformance is determined before │ │ detecting any │ │ 361 // IDR or non-IDR slices, so │ │ the non-conformant frames' │ │ keyframe analysis │ │ 362 // reports std::nullopt │ │ (which means undetermined │ │ analysis result). │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Fix the brace. ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"old_string":" {\"P SPS P\",\n false}, // SPS afte… │ │ │ │ Failed to edit, 0 occurrences found for │ │ old_string in │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src/media/formats/ │ │ mp4/avc_unittest.cc. No edits made. The │ │ exact text in old_string was not found. │ │ Ensure you're not escaping content │ │ incorrectly and check whitespace, │ │ indentation, and context. Use read_file │ │ tool to verify. │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Fixed. Compiling. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell agents/extensions/landmines/agent_autoninja -C out/Default med… │ │ │ │ ... first 109 lines hidden ... │ │ kNALU1 + sizeof(kNALU1)); │ │ | │ │ ^~~~~~ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :202:33: note: See │ │ //docs/unsafe_buffers.md for help. │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :210:33: error: unsafe pointer │ │ arithmetic │ │ [-Werror,-Wunsafe-buffer-usage] │ │ 210 | buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ | │ │ ^~~~~~ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :210:33: note: See │ │ //docs/unsafe_buffers.md for help. │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :212:33: error: unsafe pointer │ │ arithmetic │ │ [-Werror,-Wunsafe-buffer-usage] │ │ 212 | buf.insert(buf.end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ │ | │ │ ^~~~~~ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :212:33: note: See │ │ //docs/unsafe_buffers.md for help. │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :274:16: error: function 'memcmp' is │ │ unsafe │ │ [-Werror,-Wunsafe-buffer-usage-in-libc- │ │ call] │ │ 274 | EXPECT_EQ(0, │ │ memcmp(kExpectedParamSets, &buf[0], │ │ | │ │ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ │ │ 275 | │ │ sizeof(kExpectedParamSets))); │ │ | │ │ ~~~~~~~~~~~~~~~~~~~~~~~~~~~ │ │ ../../third_party/googletest/src/google │ │ test/include/gtest/gtest.h:1888:69: │ │ note: expanded from macro 'EXPECT_EQ' │ │ 1888 | │ │ EXPECT_PRED_FORMAT2(::testing::internal │ │ ::EqHelper::Compare, val1, val2) │ │ | │ │ ^~~~ │ │ ../../third_party/googletest/src/google │ │ test/include/gtest/gtest_pred_impl.h:14 │ │ 4:40: note: expanded from macro │ │ 'EXPECT_PRED_FORMAT2' │ │ 144 | │ │ GTEST_PRED_FORMAT2_(pred_format, v1, │ │ v2, GTEST_NONFATAL_FAILURE_) │ │ | │ │ ^~ │ │ ../../third_party/googletest/src/google │ │ test/include/gtest/gtest_pred_impl.h:13 │ │ 4:43: note: expanded from macro │ │ 'GTEST_PRED_FORMAT2_' │ │ 134 | │ │ GTEST_ASSERT_(pred_format(#v1, #v2, v1, │ │ v2), on_failure) │ │ | │ │ ^~ │ │ ../../third_party/googletest/src/google │ │ test/include/gtest/gtest_pred_impl.h:79 │ │ :52: note: expanded from macro │ │ 'GTEST_ASSERT_' │ │ 79 | if (const │ │ ::testing::AssertionResult gtest_ar = │ │ (expression)) \ │ │ | │ │ ^~~~~~~~~~ │ │ ../../media/formats/mp4/avc_unittest.cc │ │ :274:16: note: See │ │ //docs/unsafe_buffers.md for help. │ │ 10 errors generated. │ │ │ │ │ │ 20.00s Build Failure: 1 done 1 failed 2 │ │ remaining - 0.05/s │ │ cannot make progress due to previous 1 │ │ errors: remote-exec │ │ e7d3f71e25bfe0dd91b9541894a36276c9eb2a6 │ │ 2b42aa79af486c1de56c1692d/355 failed: │ │ exit=1 │ │ │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ buf->insert and memcmp are causing compiler errors. I'll fix them using base::span and std::equal, starting with buf->insert. ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"new_string":" buf.insert(buf.end(), std::begin(kNALU1), std:… │ │ │ │ Failed to edit, Expected 9 occurrences │ │ but found 4 for old_string in file: │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src/media/formats/ │ │ mp4/avc_unittest.cc │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ replace failed; unexpected occurrence count. Rereading the file to get the latest content, then retrying with the correct count. ╭────────────────────────────────────────────────╮ │ ✔ ReadFile media/formats/mp4/avc_unittest.cc │ ╰────────────────────────────────────────────────╯ ✦ Okay, I'll be more specific. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: buf->insert(buf->end(), … │ │ │ │ 143 buf->clear(); │ │ 144 │ │ 145 WriteLength(length_size, │ │ sizeof(kNALU1), buf); │ │ 146 - buf->insert(buf->end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 146 + buf->insert(buf->end(), std:: │ │ begin(kNALU1), std::end(kNALU1)); │ │ 147 │ │ 148 WriteLength(length_size, │ │ sizeof(kNALU2), buf); │ │ 149 buf->insert(buf->end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ kNALU2 next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: buf->insert(buf->end(), … │ │ │ │ 146 buf->insert(buf->end(), std:: │ │ begin(kNALU1), std::end(kNALU1)); │ │ 147 │ │ 148 WriteLength(length_size, │ │ sizeof(kNALU2), buf); │ │ 149 - buf->insert(buf->end(), │ │ kNALU2, kNALU2 + sizeof(kNALU2)); │ │ 149 + buf->insert(buf->end(), std:: │ │ begin(kNALU2), std::end(kNALU2)); │ │ 150 } │ │ 151 │ │ 152 }; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, NALUSizeTooLarge test time. ╭──────────────────────────────────────────────────────────────────────────╮ │ x Edit {"file_path":"/usr/local/google/home/keishi/gemini-run/workdirs… │ │ │ │ Failed to edit, Expected 1 occurrence │ │ but found 4 for old_string in file: │ │ /usr/local/google/home/keishi/gemini-ru │ │ n/workdirs/chromium1/src/media/formats/ │ │ mp4/avc_unittest.cc │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ replace failed; wrong occurrence count. I'll reread the file and retry with a more specific old_string. ╭────────────────────────────────────────────────╮ │ ✔ ReadFile media/formats/mp4/avc_unittest.cc │ ╰────────────────────────────────────────────────╯ ✦ Okay, I'll be more specific. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: TEST_P(AVCConversionTest, NA… │ │ │ │ 173 TEST_P(AVCConversionTest, │ │ NALUSizeTooLarge) { │ │ 174 std::vector buf; │ │ 175 WriteLength(GetParam(), 10 * │ │ sizeof(kNALU1), &buf); │ │ 176 - buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 176 + buf.insert(buf.end(), std:: │ │ begin(kNALU1), std::end(kNALU1)); │ │ 177 EXPECT_FALSE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, nullptr)); │ │ 178 } │ │ 179 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ NALUSizeIsZero test, let's do it. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: TEST_P(AVCConversionTest, NA… │ │ │ │ 182 WriteLength(GetParam(), 0, │ │ &buf); │ │ 183 │ │ 184 WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 185 - buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 185 + buf.insert(buf.end(), std:: │ │ begin(kNALU1), std::end(kNALU1)); │ │ 186 │ │ 187 WriteLength(GetParam(), 0, │ │ &buf); │ │ 188 │ │ 189 WriteLength(GetParam(), sizeof │ │ (kNALU2), &buf); │ │ 190 - buf.insert(buf.end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ │ 190 + buf.insert(buf.end(), std:: │ │ begin(kNALU2), std::end(kNALU2)); │ │ 191 │ │ 192 EXPECT_FALSE(AVC:: │ │ ConvertFrameToAnnexB(GetParam(), │ │ &buf, nullptr)); │ │ 193 } │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Okay, SubsampleSizesUpdatedAfterAnnexBConversion test next. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: // Write the first subsamp… │ │ │ │ 199 │ │ 200 // Write the first subsample, │ │ consisting of only one NALU │ │ 201 WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 202 - buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 202 + buf.insert(buf.end(), std::begin │ │ (kNALU1), std::end(kNALU1)); │ │ 203 │ │ 204 subsample.clear_bytes = GetParam │ │ () + sizeof(kNALU1); │ │ 205 subsample.cypher_bytes = 0; │ │ 207 │ │ 208 // Write the second subsample, │ │ containing two NALUs │ │ 209 WriteLength(GetParam(), sizeof │ │ (kNALU1), &buf); │ │ 210 - buf.insert(buf.end(), kNALU1, │ │ kNALU1 + sizeof(kNALU1)); │ │ 210 + buf.insert(buf.end(), std::begin │ │ (kNALU1), std::end(kNALU1)); │ │ 211 WriteLength(GetParam(), sizeof │ │ (kNALU2), &buf); │ │ 212 - buf.insert(buf.end(), kNALU2, │ │ kNALU2 + sizeof(kNALU2)); │ │ 212 + buf.insert(buf.end(), std::begin │ │ (kNALU2), std::end(kNALU2)); │ │ 213 │ │ 214 subsample.clear_bytes = 2* │ │ GetParam() + sizeof(kNALU1) + │ │ sizeof(kNALU2); │ │ 215 subsample.cypher_bytes = 0; │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Fixing memcmp. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: EXPECT_EQ(0, memcmp(kExpec… │ │ │ │ 165 expected); │ │ 166 │ │ 167 EXPECT_EQ(buf.size(), sizeof │ │ (kExpected)); │ │ 168 - EXPECT_EQ(0, memcmp(kExpected, │ │ &buf[0], sizeof(kExpected))); │ │ 168 + EXPECT_TRUE(std::equal(std:: │ │ begin(kExpected), std::end │ │ (kExpected), buf.begin())); │ │ 169 EXPECT_EQ("P,SDC", │ │ AnnexBToString(buf, subsamples)); │ │ 170 } │ │ 171 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Next memcmp. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Edit media/formats/mp4/avc_unittest.cc: EXPECT_EQ(0, memcmp(kExpec… │ │ │ │ 271 std::vector buf; │ │ 272 std::vector │ │ subsamples; │ │ 273 EXPECT_TRUE(AVC:: │ │ ConvertConfigToAnnexB(avc_config, │ │ &buf)); │ │ 274 - EXPECT_EQ(0, memcmp │ │ (kExpectedParamSets, &buf[0], │ │ 275 - sizeof │ │ (kExpectedParamSets))); │ │ 274 + EXPECT_TRUE(std::equal(std:: │ │ begin(kExpectedParamSets), │ │ 275 + std::end │ │ (kExpectedParamSets), buf.begin │ │ ())); │ │ 276 EXPECT_EQ("SPS,SPS,PPS", │ │ AnnexBToString(buf, subsamples)); │ │ 277 } │ │ 278 │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Code's fixed. Compiling media_unittests. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell agents/extensions/landmines/agent_autoninja -C out/Default med… │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ Build good. Running tests. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell tools/autotest.py -C out/Default media_unittests (Run the test… │ │ │ │ │ │ Target "media_unittests" did not match │ │ any files. │ │ │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ autotest.py failed with media_unittests. I'll run the binary directly. ╭──────────────────────────────────────────────────────────────────────────╮ │ ✔ Shell out/Default/media_unittests (Run the tests to ensure that the … │ │ │ │ ... first 26537 lines hidden ... │ │ B__ (132 ms) │ │ [8250/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile0__PIXEL_FORMAT_I420__ (390 ms) │ │ [8251/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile0__PIXEL_FORMAT_NV12__ (385 ms) │ │ [8252/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile0__PIXEL_FORMAT_XRGB__ (373 ms) │ │ [8253/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile1__PIXEL_FORMAT_I444__ (515 ms) │ │ [8254/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile1__PIXEL_FORMAT_NV12__ (586 ms) │ │ [8255/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile1__PIXEL_FORMAT_XRGB__ (543 ms) │ │ [8256/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile2__PIXEL_FORMAT_I420__ (502 ms) │ │ [8257/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile2__PIXEL_FORMAT_NV12__ (470 ms) │ │ [8258/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile2__PIXEL_FORMAT_XRGB__ (481 ms) │ │ [8259/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile3__PIXEL_FORMAT_I444__ (649 ms) │ │ [8260/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile3__PIXEL_FORMAT_NV12__ (651 ms) │ │ [8261/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp9__vp9_p │ │ rofile3__PIXEL_FORMAT_XRGB__ (642 ms) │ │ [8262/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp8__vp8__ │ │ PIXEL_FORMAT_I420__ (140 ms) │ │ [8263/8273] │ │ VpxGeneric/SoftwareVideoEncoderTest.Enc │ │ odeAndDecodeWithEnablingDrop/vp8__vp8__ │ │ PIXEL_FORMAT_XRGB__ (132 ms) │ │ [8264/8273] │ │ PipelineIntegrationTest.BasicPlaybackHa │ │ shed (97 ms) │ │ [8265/8273] │ │ PipelineIntegrationTest.WaveLayoutChang │ │ e (10 ms) │ │ [8266/8273] │ │ PipelineIntegrationTest.PlaybackStereo4 │ │ 8000hz (14 ms) │ │ [8267/8273] │ │ PipelineIntegrationTest.PlaybackWithAud │ │ ioTrackDisabledThenEnabled (2912 ms) │ │ [8268/8273] │ │ PipelineIntegrationTest.PlaybackWithVid │ │ eoTrackDisabledThenEnabled (2938 ms) │ │ [8269/8273] │ │ PipelineIntegrationTest.TrackStatusChan │ │ gesBeforePipelineStarted (2 ms) │ │ [8270/8273] │ │ PipelineIntegrationTest.TrackStatusChan │ │ gesAfterPipelineEnded (85 ms) │ │ [8271/8273] │ │ PipelineIntegrationTest.TrackStatusChan │ │ gesWhileSuspended (2891 ms) │ │ [8272/8273] │ │ PipelineIntegrationTest.ReinitRenderers │ │ WhileAudioTrackIsDisabled (203 ms) │ │ [8273/8273] │ │ PipelineIntegrationTest.ReinitRenderers │ │ WhileVideoTrackIsDisabled (178 ms) │ │ SUCCESS: all tests passed. │ │ Tests took 47 seconds. │ │ │ ╰──────────────────────────────────────────────────────────────────────────╯ ✦ GEMINI_JOB_COMPLETE_GEMINI ⠹ Reaching the Zenith (esc to cancel, 14m 6s) Using: - 10 open files (ctrl+g to view) - 2 GEMINI.md files - 2 MCP servers (ctrl+t to view) YOLO mode (ctrl + y to toggle) src (gemini-run/batch-run-1755462473/group_129*) no sandbox (see /docs) gemini-2.5-pro (93% context left)